Fill level control miho Newton X2P

Fill level control miho Newton X2P
Precise, universal application: Checking for underfilling after the filler and capper with the aid of an X-ray source and a point detector.
The inspection device can be used with almost all beverage containers, such as beverage cans, bottles and carton packs.

To check the fill level for any underfilling in containers such as bottles, carton packaging and beverage cans, regardless of the product or the label (metal foil is also possible). Broad spectrum of applications: even foaming products to be controlled!

The measurement is based on an X-ray technology especially developed for this purpose. Minimum radiation exposure, since pulsed X-ray radiation is only generated at the short moment of measurement. The radiation emission is typically below the naturally occurring levels in enclosed spaces.

Comprehensive statistics for individual types of faults are available. A serial fault detection is implemented. Connection to an external production data acquisition system is possible.

The inspection head can be adjusted by using the handwheel height adjustment. The point of installation is normally at the outfeed of the filler or at the outfeed of the labelling machine.

fries Zeichnungen aller Flaschen die inspeziert werden können
Fries zeichnungen aller Flaschen, die inspeziert werden können

Accessories & modifications

Inspecting the fill level for overfilling in containers such as bottles, cardboard packaging and beverage cans, regardless of the product or the labelling (metal foil is also possible). Even heavily foaming products can be safely inspected!

Filler Monitor miho FM 2, stainless steel electronic cabinet, to locate incorrect filling due to defect filling valves.

miho fm2

Filler monitor
miho FM 2

  • Filler monitoring
  • Localisation of faulty valve

Second inspection head, using x-ray technologie to check for metal foreign bodies like filling tubes in filled and closed beverage cans (aluminium or steel cans) or bottles. Including hand wheel height adjustment, additional software and hardware to be included in the electronic cabinet of a Newton X2P.

miho mx

Filling pipe detection
miho MX

  • Pulsed X-ray technology
  • Minimal radiation exposure
  • Optional HSPM control

Automatic request of the specially prepared and marked test bottles to check the flawless operation of the inspection machine. The test bottles are marked with reflection foil (One sheet of reflection foil 230mm x 100mm is included. The test cycle of the test bottle request is based on time and freely adjustable. Free selectable signal output for the test bottle request. Logging of the last test bottle run in the inspection system and, as an option, in the production data acquisition software miho Awes, incl timestamp (not included).

To detect the presence of a metal cap (crown cork, screw cap) via an inductive proximity switch. Including height adjustment for different bottle heights.

For detecting the presence of a plastic cap by means of a width measurement of the cap diameter. Suitable for glass bottles and PET bottles. Including height adjustment for different bottle heights.

Additional sensors to record and inspect the presence of natural cork by means of a light sensor. Including height adjustment for different bottle heights.

miho hsp

High speed pusher
miho HSP

  • Pneumatic pusher
  • Up to 100 000 containers/h
  • Including reject monitoring
miho hspm

Multi reject system
miho HSPM

  • Linear drive
  • Up to 72 000 containers/h
  • Very wide range of containers
miho leonardo m

Linear Reject System
miho Leonardo M

  • Magneto-mechanical
  • Gearless transmission drive
  • Smooth and precise
miho Leonardo SFM

Segment Reject System miho Leonardo SFM

  • Upright rejection on parallel track
  • Elektro-magnetic actuator, no compressed air
  • Compact design

Software package for the production data acquisition software miho AWeS. All production data, counters and test bottle protocol are logged according to the Weihenstephan standard. For all miho systems based on the miho VIDIOS® or miho MASTER® platform.

Software package for the remote visualization of the operating condition, the parameter and the camera images on an authorized computer. Monitoring of e.g. counters and malfunctions. Monitoring and remote control of the inspection machine by a miho service engineer, re-entry and optimization of the inspection parameters, exact and fast analysis of errors.

Scroll to Top